VeloChampion 2 in 1 Threaded CO2 Inflator Pump + Sleeve. Presta & Schrader Compatible

FEATURES:

• QUICK INFLATE – Inflate your tyre in seconds!  
  
• SECURE CONNECTION – Threaded connection to the inner tube valve for a safe connection
  
• CONTROL THE AIRFLOW – The easy-open lever allows you to control the flow of CO2 into your inner tube. 
  
• COMPACT AND DURABLE – Made from tough alloy materials. 
  
• 2 IN 1 INFLATOR HEAD – Suitable for Presta and Schrader valves
  
• SECURE & NO LEAKS - Our threaded head will allow for a secure connection to the cartridges.
  
• HIGH-QUALITY- Durable alloy pump head 
• Suitable for 16g threaded CO2 cartridges.

How to use the CO2 Inflator: 

1. Ensure the lever is set to the off position(c).  
2. Slide the foam sleeve over the CO2 cartridge (16g only*). 
3. Thread the cartridge clockwise into the CO2 inflator head and firmly hand tighten until fully pierced. As the cap of the cartridge is sealed you will hear a rush of gas, this is normal. DO NOT remove the cartridge until empty. 
4. Thread the 2 in 1 valve head on to the Presta or Schrader valve.  
5. Slowly turn the lever counter-clockwise towards a 90o angle to release the CO2 (o).  
6. Fill the tyre to the desired pressure. 
7.  Turn the lever 90o clockwise to close the valve.  
8. Unscrew the inflator’s valve head from the tyre and keep the inflator head pointing away from your body to prevent injury. 
9. Unscrew and remove the CO2 cartridge from the CO2 inflator.  

WEIGHT & DIMENSIONS:

Head Dimensions: 
Width:  5cm
Height: 3cm 
Head Weight: 24grams
Head & Sleeve Weight:28 grams

Sleeve Dimensions: 
Circumference: 9.5cm /3.74”  
Height: 6cm / 2.36” 
Weight: 4 grams 

Material: Aluminium Alloy Pump Head and EVA foam sleeve 

* Co2 cartridges are NOT included with this product.